Brand-hydraulics FG STYLE ADJUSTABLE PRIORITY DIVIDER Manual de usuario descargar pdf

05/14

FG STYLE ADJUSTABLE PRIORITY DIVIDER

INSTALLATION & USER GUIDE

SPECIFICATIONS:

• Rated for 3000 psi (207 bar).

• Rated for 0-12 gpm (0-56.8 lpm) max. priority.

• 30-Micron filtration recommended.

• Weight - FG52 & FG54 = 8 lbs. (3.6 kg).

FEATURES:

 Priority Port – The priority port is the port located on the same side as the large hex jam nut.

 Excess Port – Flow coming from the excess port is also pressure compensated.

MOUNTING & ADJUSTMENT INSTRUCTIONS:

 Mounting – Valve can be mounted in any orientation. Valve must be mounted on a flat surface. Special attention should

be paid to not bend or twist the casting when mounting. Doing so may cause the compensator spool to bind, causing

valve to fail. It is recommended to install washers between casting and mounting surface.

 Relief Adjustment (FG52 valve) –Relief setting is factory preset to 1500 psi, unless otherwise noted within model code.

Relief valve can be set anywhere within the range of 500 psi to 3000psi.

To adjust relief pressure: There is a 5/16” hex screw located inside the excess port. Turning the screw in, or

clockwise 1 full turn will increase pressure by 800 psi.

FREQUENTLY ASKED QUESTIONS:

Q: Can the priority port be blocked or plugged?

A: No. If the priority port is blocked or plugged for any reason the compensation spool will attempt to compensate for

increasing pressure, and shift thus blocking the excess port as well, and rendering valve inoperable. DO NOT BLOCK THE

PRIORITY PORT.

Q: Can the Excess Port be blocked or plugged?

A: The Excess Port can be blocked or plugged, but doing so requires a pressure compensated or load sense pump. Plugging

the excess port may create instability issues that can be remedied by switching the compensator spool to a different spool.

(Part # XDC609)

Q: Can flow be sent in reverse through valve.

A: Yes, but only if you have a FG54 valve. If you’re unsure of your valve’s model number, please contact factory for

assistance.

TROUBLESHOOTING:

Problem: Valve chatters or has stability issues. Instability generally occurs when the valve sees an application that has

rapidly changing loads. (ie: Fan, Vibration, etc.) Because of these changing loads the compensator spool tries to compensate

rapidly. This causes the valve to become unstable. An unstable valve will hunt, make noise, and/or chatter.

Solution: Most instability issues can be solved by using a different compensator spool. A replacement spool designed for

load changing applications can be ordered. (Part #: XDC609)

1 2

Indice de contenidos

Pagina 1 - TROUBLESHOOTING:

05/14 FG STYLE ADJUSTABLE PRIORITY DIVIDER INSTALLATION & USER GUIDE SPECIFICATIONS: • Rated for 3000 psi (207 bar). • Rated for 0-12 gpm (0-5

Pagina 2 - SAFETY PRECAUTIONS:

05/14 EXCESSPORT2X Ø1764 [Ø6.7]PRIORITY PORTPRIORITY PORTADJUSTMENTINLET PORTTANK PORT (FG52)4.55" [115.6]2.95" [75.0]3.88" [98.4]5.20

Comentarios a estos manuales

Sin comentarios

Brand-hydraulics FG STYLE ADJUSTABLE PRIORITY DIVIDER Manual de usuario

Busca en linea o descarga Manual de usuario para Equipo Brand-hydraulics FG STYLE ADJUSTABLE PRIORITY DIVIDER. BRAND Hydraulics FG STYLE ADJUSTABLE PRIORITY DIVIDER User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Brand-hydraulics FG STYLE ADJUSTABLE PRIORITY DIVIDER